REMOVAL AND INSTALLATION


caution *: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the ground in the unladen condition.
Pre-installation and Post-installation Operation
  • Stabilizer link removal and installation (Stabilizer bar and semi-trailing arm connection) (Refer to ).
  • Stabilizer bushing removal and installation (Refer to ).




Removal steps
<<A>>
1.
 Rear shock absorber bolt


·
 Rear wheel speed sensor and brake hose clamp


2.
 Rear suspension spring upper pad

>>A<<
 3.
 Rear suspension coil spring

>>A<<
 4.
 Rear suspension spring lower pad

REMOVAL SERVICE POINT

<<A>> REAR SHOCK ABSORBER BOLT REMOVAL

After supporting the semi-trailing arm rear shock absorber mounting area with a jack, remove the rear shock absorber bolt.

INSTALLATION SERVICE POINTS

>>A<< REAR SUSPENSION SPRING LOWER PAD/REAR SUSPENSION COIL SPRING INSTALLATION

Fit the lower pad into the coil spring end, and then align the bottom of coil spring with the spring seat groove of semi - trailing arm.