|
The master cylinder used has no
check valve, so if bleeding is carried out by the following
procedure, bleeding of air from the brake pipeline will
become easier (When brake fluid is not
contained in the master cylinder).
|
|
1.Fill the reservoir with
brake fluid.
|
|
2.Keep the brake pedal
depressed.
|
![](../../../img/35/AC302063AC00ENG.png)
|
3.Have another person cover
the master cylinder outlet with a finger. 4.With
the outlet still closed, release the brake
pedal. 5.Repeat steps 2 -
4 three or four times to fill the inside of the master
cylinder
with brake fluid.
|
![](../../../img/35/AC301228AB00ENG.png)
|
Start the engine and bleed the air
in the sequence shown in the figure.
|