REMOVAL AND INSTALLATION


Pre-removal Operation
  • Air Cleaner Resonator, Air Cleaner Cover, Air Cleaner Intake Duct, Air Cleaner Body Assembly Removal (Refer to GROUP 15, Air Cleaner.) <LH drive vehicles>
  • Engine Cover and Engine Cover Bracket Removal (Refer to GROUP 11A, Camshaft and Valve Stem Seal .) <LH drive vehicles>
  • Air Intake Hose Removal (Refer to GROUP 15, Air Cleaner.) <LH drive vehicles>

 Post-installation Operation
  • Air Intake Hose Installation (Refer to GROUP 15, Air Cleaner.) <LH drive vehicles>
  • Engine Cover and Engine Cover Bracket Installation (Refer to GROUP 11A, Camshaft and Valve Stem Seal .) <LH drive vehicles>
  • Air Cleaner Resonator, Air Cleaner Cover, Air Cleaner Intake Duct, Air Cleaner Body Assembly Installation (Refer to GROUP 15, Air Cleaner.) <LH drive vehicles>
  • Brake Pedal Adjustment (Refer to .)




Removal steps


1.
 Harness connector


2.
 Stop lamp switch


3.
 Pedal clip


4.
 Pedal stopper


5.
 Split pin <A/T>


6.
 Shift lock cable connection <A/T>


7.
 Snap pin


8.
 Pin


9.
 Pedal pad

>>A<<
 10.
 Guide bracket
<<A>>
 >>A<<
 11.
 Brake pedal assembly

REMOVAL SERVICE POINT

<<A>> BRAKE PEDAL ASSEMBLY REMOVAL
While pulling the brake booster from the engine compartment, remove the brake pedal assembly.

INSTALLATION SERVICE POINTS

>>A<< BRAKE PEDAL ASSEMBLY/GUIDE BRACKET INSTALLATION
1.Temporarily tighten the brake pedal assembly.
2.Temporarily tighten the guide bracket.

3.Tighten the mounting nuts and bolts in alphabetical order shown in the illustration.