REMOVAL AND INSTALLATION


caution The vehicle speed detection encoder collects any metallic particle easily, because it is magnetized. Make sure that the encoder should not collect any metallic particle. Check that there is not any trouble prior to reassembling it.
Pre-removal operation
  • Engine cover removal (Refer to GROUP 11A, Camshaft and valve stem seal .) <Front: left>
  • Air cleaner body assembly removal (Refer to GROUP 15, Air Cleaner .) <Front: left>

 Post-installation Operation
  • Air cleaner body assembly installation (Refer to GROUP 15, Air Cleaner .) <Front: left>
  • Engine cover installation (Refer to GROUP 11A, Camshaft and valve stem seal .) <Front: left>




Front wheel speed sensor removal steps


1.
 Bolt (front wheel speed sensor and knuckle connection)


2.
 front wheel speed sensor bracket
<<A>>
·
 Front wheel speed sensor connector

>>A<<
 3.
 Front wheel speed sensor grommet


4.
 Front wheel speed sensor



Rear wheel speed sensor removal steps


5.
 Bolt (rear wheel speed sensor and trailing arm connection)


6.
 Bolt (rear wheel speed sensor and rear suspension lower arm assembly connection)


7.
 Bolt (rear wheel speed sensor and rear suspension crossmember connection)


8.
 Bolt (rear wheel speed sensor and body connection)


·
 Rear wheel speed sensor connector


9.
 Rear wheel speed sensor


10.
 Heat protector
note The vehicle speed detection encoder is integrated with the front hub and the rear hub, which is non-serviceable.

REMOVAL SERVICE POINT

<<A>> FRONT WHEEL SPEED SENSOR CONNECTOR REMOVAL <LH>

note The front wheel speed sensor connector is in the harness cover as shown.

INSTALLATION SERVICE POINT

>>A<< FRONT WHEEL SPEED SENSOR GROMMET REMOVAL

Install the front wheel speed sensor grommet to the body panel so that there is no space between them.