|
1.
| caution |
Do not connect the battery
terminals in reverse as the wheel speed sensor
may be damaged.
|
Use special tool extra fine probe MB992006 to
connect the circuit tester and measure current flown through
wheel speed sensor with wheel speed sensor separated from
the vehicle.
Standard value: 5.9 - 8.4 mA
or 11.8 - 16.8 mA
2.If the
measurement value is outside the standard value, replace the
wheel speed sensor with a new one.
|
|
1.Use special tool extra
fine probe MB992006 to connect the circuit tester and
measure the insulation resistance from terminals 1 and 2 to
the wheel speed sensor and body with the wheel speed sensor
separated from the vehicle.
Standard value: 5
MΩ or more
2.If the insulation
resistance is outside the standard value, replace the wheel
speed sensor with a new one.
|