|
Check that the ABS warning lamp
illuminates as follows.
| note |
The brake warning lamp is used
as a EBD warning lamp.
|
1.When the ignition switch is turned to the
"ON" position, the ABS warning lamp and
brake warning lamp illuminates for approximately 3 seconds
and then switches off.
2.The ABS and brake warning
lamps illuminate for three seconds*1 and
then go out*2.
| note |
- *1: ABS warning lamp
may stay ON until the vehicle speed
reaches
a few km/h. As far as the ABS-ECU
stores any diagnosis code related to the
ABS sensor
malfunction or the motor malfunction as
past trouble, the ABS-ECU continues
illuminating ABS
warning lamp until it verifies that the
malfunction for that code is resolved
(Startup check).
- *2: Brake warning lamp
does not go out when the parking brake
is applied or the brake fluid level is
lowered.
|
3.If the illumination is other than the
above, check the diagnosis codes.
|