![](../../../img/35/AC310120AB00ENG.png)
|
caution |
Before connecting or disconnecting the
M.U.T.-III, turn the ignition switch to the "LOCK"
(OFF) position.
|
Use M.U.T.-III to diagnose the CAN bus lines. (1)Connect
M.U.T.-III to the 16-pin diagnosis connector. (2)Turn the ignition
switch to the "ON" position. (3)Diagnose the CAN bus
line.
Q.
Is the check result normal?
Check and repair the power
supply circuit system (Refer to ).
Repair the CAN bus
lines (Refer to GROUP 54F, CAN bus line Diagnostic flow ).
|