REMOVAL AND INSTALLATION
Pre-removal Operation
Front scuff plate <driver’s side> removal (Refer to GROUP 52A, Interior Trim
).
Cowl side trim <driver’s side> removal (Refer to GROUP 52A, Interior Trim
).
Centre console side cover removal <driver’s side> (Refer to GROUP 52A, Instrumental Panel
).
Footrest removal
Accelerator pedal arm stopper removal (Refer to GROUP 17, Accelerator pedal
).
Post-installation Operation
Accelerator pedal arm stopper installation (Refer to GROUP 17, Accelerator pedal
).
Footrest installation
Centre console side cover installation <driver’s side> (Refer to GROUP 52A, Instrumental Panel
).
Cowl side trim <driver’s side> installation (Refer to GROUP 52A, Interior Trim
).
Front scuff plate <driver’s side> installation (Refer to GROUP 52A, Interior Trim
).
Parking brake pedal stroke check and adjustment (Refer to
).
Removal steps
·
Turn up the floor carpet.
1.
Parking brake pedal mounting nuts
2.
Plate
3.
Plate seal
4.
Bolt (securing the parking brake pedal assembly to the front deck crossmember assembly)
5.
Parking brake switch connector disconnection
6.
Adjuster
7.
Adjuster holder
8.
Clip
>>A<<
9.
Parking brake front cable
>>A<<
10.
Parking brake pedal assembly
11.
Parking brake switch
12.
Pedal pad
13.
Parking brake pedal bracket
14.
Return spring
15.
Tube
16.
Parking brake pedal
INSTALLATION SERVICE POINTS
>>A<< CONNECTING PARKING BRAKE FRONT CABLE TO PARKING BRAKE PEDAL ASSEMBLY
note
When connecting the parking brake front cable to the parking brake pedal assembly, the part shown may drop out. However, this is not a problem.