|
1.With the engine running
(hydraulic operation), set the front wheels straight
ahead.
|
![](../../../img/37/ACX01122AB00ENG.png)
|
2.Measure the play on the
steering wheel circumference before the wheels start to move
when
slightly moving the steering wheel in both
directions. Limit: 30 mm 3.When
the play exceeds the limit, check for the play on the
steering shaft and steering
linkage connection. Correct or replace. 4.If the
free play still exceeds the limit value, set the steering
wheel straight ahead
with the engine stopped. Load 5 N towards the steering wheel
circumference and check the play. Standard
value (steering wheel play with the engine stopped): 10
mm or less If the play exceeds the standard
value, remove the steering gear (Refer to )
and check the total pinion torque (Refer to ).
|