DISASSEMBLY AND REASSEMBLY

			Disassembly steps
<<A>>	>>A<<	1.	Steering locking bolt
	>>A<<	2.	Engine starting switch bracket
	>>A<<	3.	Engine starting switch assembly
		4.	Steering column shaft assembly

DISASSEMBLY SERVICE POINT

<<A>> STEERING LOCKING BOLT REMOVAL

1.Drill in the special bolt a hole deep enough for the tap to stand.
2.Remove the special bolt with a left-hand tap.

REASSEMBLY SERVICE POINT

>>A<< ENGINE STARTING SWITCH ASSEMBLY / ENGINE STARTING SWITCH BRACKET / STEERING LOCKING BOLT INSTALLATION

caution

The steering lock bracket and bolts must be replaced with new ones when the steering lock is installed.

1.When installing the steering lock cylinder assembly and steering lock bracket to the column tube, temporarily install the steering lock in alignment with the column boss.

2.After checking that the lock works properly, tighten the special bolts until the head twists off.