|
Check that the front door window
glass operates smoothly when it is fully raised and fully
lowered. If there is a problem, adjust by the following
procedure.
|
|
1.Removal the front door
trim assembly. Refer to GROUP 52A, Door Trim .
|
|
2.Removal the waterproof
film. Refer to .
|
|
3.Loosen the front door
window glass mounting bolts.
|
![](../../../img/42/AC310893AB00ENG.png)
|
4.Install the special tool
(glass retainer, MB99175) as shown. Adjust the clearance
between the rear end of the front door window glass and the
door window glass runchannel. Finally, tighten the front
door window glass mounting bolts to 5.0±1.0
N·m.
|
|
Check that the rear door window
glass operates smoothly when it is fully raised and fully
lowered. If there is a problem, adjust by the following
procedure.
|
|
1.Removal the rear door trim
assembly. Refer to GROUP 52A, Door Trim .
|
|
2.Removal the waterproof
film. Refer to .
|
|
3.Loosen the rear door
window glass mounting bolts.
|
![](../../../img/42/AC302222AB00ENG.png)
|
4.Install the special tool
(glass retainer, MB99175) as shown. Adjust the clearance
between the rear end of the front door window glass and the
door window glass runchannel. Finally, tighten the front
door window glass mounting bolts to 5.0±1.0
N·m.
|