![](../../../img/42/AC310862AB01ENG.png)
![](../../../img/42/AC310864AB01ENG.png)
|
1.Remove the sunroof fuse
from the fuse box, and then connect a circuit tester as
shown. 2.Operate the sunroof switch to open the
sunroof. Measure when the sunroof is half
opened. Standard value: 7 A or less (at 20
°C) 3.Check the following areas if
the operating current of the rear sunroof lid glass exceeds
the standard value.
- Improperly installed rear sunroof assembly,
deformation or any foreign substances
- Drive cable fastening
- Tilting of rear sunroof lid glass
|