![](../../../img/42/AC103294AA00ENG.png)
|
1.Place a wooden board about
10 mm thick as shown. Then, raise the window
glass. 2.Check that the window lowers by about 150
mm when the window clamps the board. If this doesn’t
happen, carry out troubleshooting. Refer to GROUP 54D,
Troubleshooting , or refer
to GROUP 54E, Troubleshooting .
note |
If the anti-trap function
(safety mechanism) is activated consecutively
three times or more, make the power window
switch learn the fully closed position of the
power window (Refer to ).
|
|