REMOVAL AND INSTALLATION


Pre-removal Operation
  • Door Trim Assembly Removal (Refer to GROUP 52A, Door Trim ).
  • Waterproof Film Removal (Refer to ).

 Post-installation Operation
  • Door Window Glass Adjustment (Refer to ).
  • Waterproof Film Installation (Refer to ).
  • Door Trim Assembly Installation (Refer to GROUP 52A, Door Trim ).




Power switch removal


1.
 Power window main switch <Driver’s side> and power window sub switch <Passenger’s side> (Refer to GROUP 52A, Door Trim ).



Door window glass assembly removal steps


·
 Door beltline moulding and Door beltline inner weatherstrip (Refer to ).


2.
 Door window glass assembly


3.
 Glass holder



Power window regulator removal steps

>>A<<
 ·
 Post-installation operation check
<<A>>
4.
 Power window regulator


5.
 Power window motor



Front lower sash removal steps


2.
 Door window glass assembly
<<A>>
4.
 Power window regulator


·
 Door window glass runchannel (Refer to ).

>>B<<
 6.
 Front lower sash



Rear lower sash removal steps


2.
 Door window glass assembly
<<A>>
4.
 Power window regulator


·
 Door window glass runchannel (Refer to ).


7.
 Rear lower sash




Power window sub switch removal


1.
 Power window sub switch (Refer to GROUP 52A, Door Trim ).



Door window glass assembly removal steps


·
 Door beltline moulding and Door beltline inner weatherstrip (Refer to ).

>>B<<
 2.
 Rear lower sash


3.
 Door window glass assembly


4.
 Glass holder



Power window regulator removal steps

>>A<<
 ·
 Post-installation operation check
<<A>>
5.
 Power window regulator


6.
 Power window motor

REMOVAL SERVICE POINT

<<A>> POWER WINDOW REGULATOR REMOVAL
1.Remove the door window glass installation bolts.

2.
caution If tinting film is adhered to the door window glass, attach special tool window glass holder (MB990480) to the outside of the glass to prevent the film from peeling off.
Lift the door window glass, and attach special tool window glass holder (MB990480) to the glass as shown to prevent the glass from falling.
3.Remove the window regulator.

INSTALLATION SERVICE POINTS

>>A<< POST-INSTALLATION OPERATION CHECK
When the following procedures are carried out, make the power window switch learn the fully closed position of the power window (Refer to ).

  • Power window regulator removal or replacement
  • Power window switch removal or replacement

>>B<< REAR LOWER SASH AND FRONT LOWER SASH INSTALLATION
Engage the rear lower sash and the front lower sash with the window sash (door) securely.