|
|
Gently lift and remove the side
sill garnish. If there is any double-sided tape remaining
on the side sill garnish, remove according to the following
instructions.
|
|
|
<Remove double-sided tape
remaining on the body surface>
|
|
1.Attach protection tape all
the way along the edges of the double-sided tape which is
still
adhering to the body.
|
|
2.Scrape off the
double-sided tape with a resin spatula as
possible.
3.Peel off the protection
tape.
4.Wipe the body surface and clean it with a
rag moistened with isopropyl alcohol.
|
|
|
<Remove double-sided tape
remaining on side sill garnish and adhere double-sided tape
(when re-using side sill garnish)>
|
|
1.Scrape off the
double-sided tape on the side sill garnish with a resin
spatula as possible.
2.Wipe the side sill garnish
surface and clean it with a rag moistened with isopropyl
alcohol.
3.Remove only a small portion of the
residual adhesive.
4.Adhere the double-sided tape
as specified on the side sill garnish (Refer to double-sided
tape adherence location ).
|
|
1.Tear off the double-sided
tape backing paper.
| note |
If Attach the adhesive tape to
the edge of the backing paper, it will be easy
to tear
off.
|
2.Install the side sill garnish.
| note |
If The double-sided tape is
difficult to affix in cold temperature, etc.,
warm the bonding
surfaces of the body and side sill garnish to
about 40-
60°C before affixing
the tape.
|
3.Firmly press in the side sill
garnish.
|
