INSPECTION


WINDSHIELD WIPER MOTOR CHECK

OPERATION CHECK OF THE WINDSHIELD WIPER MOTOR WHEN IT IS WORKING AT LOW OR HIGH SPEED.

1.Connect the positive battery terminal to windshield wiper motor connector terminal No.1 as shown. Check the low-speed operation of the motor by earthing windshield wiper motor connector terminal No.2.
2.Connect the positive battery terminal to windshield wiper motor connector terminal No.4 as shown. Check the high-speed operation of the motor by earthing windshield wiper motor connector terminal No.2.

CHECK OF STOP POSITION OF THE WINDSHIELD WIPER MOTOR
Prior to this check, ensure that there is no excessive play at the windshield wiper link.

1.Connect the battery to windshield wiper motor connector terminal No.1 as shown. Operate the motor at low speed by earthing the motor.
2.Disconnect the battery cable from motor connector terminal No.1. The motor should stop.

3.Connect the battery to motor connector terminal No.3 as shown.
4.Connect motor connector terminal No.5 to No.1 as shown.
5.Check to see that the motor runs at low speed and then stops at the automatic stop position.

WINDSHIELD WIPER SWITCH CHECK
Check the input signals (mist, intermittent, low speed and high speed) from the windshield wiper switch. (Refer to GROUP 54B, Troubleshooting , GROUP 54C, Troubleshooting , GROUP 54D, Troubleshooting or GROUP 54E, Troubleshooting .)