INSPECTION


REAR WIPER MOTOR CHECK
Inspect the rear wiper motor by removing the harness connector with the motor attached to the vehicle.

OPERATION CHECK OF THE REAR WIPER MOTOR
caution Before operating the rear wiper motor, apply water to the tailgate glass to avoid damage to the tailgate glass surface or the wiper blade due to dry wiping.

Check the motor operation by connecting the battery to the rear wiper motor as shown.

CHECK OF STOP POSITION OF THE REAR WIPER MOTOR
caution Before operating the rear wiper motor, apply water to the tailgate glass to avoid damage to the tailgate glass surface or the wiper blade due to dry wiping.

1.Connect the battery to the rear wiper motor as shown.
2.Disconnect the battery cable from the rear windshield wiper motor while it is turning and then check to see that the motor stops.

3.Re-connect the battery as shown.
4.Check to see that the rear windshield wiper motor runs and then stops at the automatic stop position.

REAR WASHER FLUID EJECTION CHECK


Move the nozzle to adjust the position so that the spray is in the area shown in the illustration.