|
|
- Check the wipers operate in the intermittent action
when the windshield intermittent wiper switch is at the intermittent operation.
- Check that the intermittent wiper interval is changed as the intermittent wiper
volume is operated.
- Turn the windshield intermittent wiper switch to the intermittent operation position.
Use the M.U.T.-III to set a simulated vehicle speed with the wiper volume held. The intermittent
wiper interval should be changed as the simulated vehicle speed is changed.
- If either of above is defective, carry out the troubleshooting. (Refer to GROUP
54B, Troubleshooting
 , GROUP 54C, Troubleshooting ,
GROUP 54D, Troubleshooting or GROUP 54E, Troubleshooting .)
|