REMOVAL AND INSTALLATION

caution

For the removal of the headlining, refer to GROUP 52B, Service Precautions and Side and Curtain Air Bag Module .

Removal steps · Third seat assembly (Refer to .) · Quarter trim upper, centre pillar trim upper, front pillar trim (Refer to .) 1. Rear heater controller assembly <Vehicles with rear heater, rear cooler or dual automatic A/C> 2. Roof inside assist grip 3. Sun visor <<A>> 4. Sun visor holder 5. Sunroof lid inner weather <Vehicles with sunroof> 6. Sunroof lid inner weather strip rear <Vehicles with sunroof> <<B>> 7. Front room lamp assembly <Vehicles without sunroof> <<B>> 8. Front room lamp assembly <Vehicles with sunroof> <<C>> 9. Headlining assembly 10. Assist grip bracket front 11. Assist grip bracket centre 12. Assist grip bracket rear

Use a flat-tipped screwdriver to disengage the tab of the sun visor holder, and remove it using moderate pressure from the forefinger and thumb.

Slide down the front room lamp assembly by pushing it forwards to disengage the front room lamp assembly from the front room lamp bracket. Then remove the front room lamp assembly.

Ornament remover set (parts number JS000004) 1.Remover A (parts number JS000001) 2.Remover B (parts number JS000003) 3.Remover C (parts number JS000002)

Use the recommended tool Remover C (parts number JS000002) as shown to remove the clip.