REMOVAL AND INSTALLATION

caution

For the removal of the front seat assembly on vehicles with the side air bags, refer to GROUP 52B, Service Precautions

and Side and Curtain Air Bag Module

		1.	Headrest
			Removal steps
		2.	Seat anchor cover front
		3.	Seat anchor cover rear inner
		4.	Seat anchor cover rear outer
		5.	Seat belt switch harness connector <Vehicles with seat belt switch>
		6.	Side-air bag module (squib) harness connector <Vehicles with side-air bag>
		7.	Front seat assembly

INSTALLATION SERVICE POINT

>>A<< FRONT SEAT ASSEMBLY INSTALLATION

1.Confirm that the seat slide is locked. Then temporarily tighten all the nuts and bolts with no load applied to the front seat cushion.
2.Tighten all the nuts and bolts to the specified torque.
Tightening torque:
Bolt: 44 ± 10 N·m
Nut: 30 ± 5 N·m