warning |
|
note | The figure indicates the left front impact
sensor. The right impact sensor is symmetrical
to this. |
REMOVAL SERVICE POINT |
<<A>>NEGATIVE BATTERY CABLE DISCONNECTION |
|
|
![]() |
Disconnect the negative battery
cable from the battery and tape the terminal to prevent
accidental connection and air bag(s) deployment. |
INSTALLATION SERVICE POINTS |
>>A<<PRE-INSTALLATION INSPECTION |
When installing the new front
impact sensor, refer to "INSPECTION." ![]() |
>>B<<FRONT IMPACT SENSOR INSTALLATION |
|
1.Securely connect the
connector. |
2.Position the front impact
sensor facing toward the front of the vehicle as indicated
by the arrow on the label, and install it securely. |
>>C<<POST-INSTALLATION INSPECTION |
1.Reconnect the negative
battery cable. |
2.Turn the ignition key to
"ON" position. |
![]() |
3.Does the SRS warning lamp
illuminate for about 7 seconds, and go out? 4.If yes, the SRS system is functioning properly. If not, consult page ![]() ![]() |