INDIVIDUAL COMPONENT SERVICE


warning
  • If heat damage may occur during paint work, remove the SRS-ECU, the air bag modules, the clock spring, front seats, side impact sensors and the seat belt with pre-tensioner.

    • SRS-ECU, air bag modules, clock spring and side impact sensors: 93° C or more
    • Seat belt with pre-tensioner: 90°C or more
  • If the SRS components are removed for the purpose of check, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.
If the SRS components are to be removed or replaced as a result of maintenance, troubleshooting etc., follow the service procedures that follow. (SRS-ECU; refer to <Except vehicles for Hong Kong and Singapore> or <Vehicles for Hong Kong and Singapore>, Driver’s and passenger’s (front) air bag modules and clock spring; refer to , Side and curtain air bag modules; refer to , Front impact sensor <Except vehicles for Hong Kong and Singapore> ; refer to , Front impact sensor <Vehicles for Hong Kong and Singapore> ; refer to , Side impact sensors; refer to , Seat belt with pre-tensioner ; refer to , Seat slide sensor <Vehicles for Australia and New Zealand> ; refer to ).