Code No.B1428: Side-Impact sensor (RH) (Squib) for Power Supply
Circuit
Code No.B1429: Side-Impact sensor (RH) (Squib) for Communication
System
![](../../../img/52/W4X52X012A00ENG.png)
caution |
If diagnosis code B1428 or B1429 is set in the
SRS-ECU, always diagnose the CAN main bus line.
|
OPERATION
The side impact sensor includes an analogue G sensor and
CPU, etc. The CPU monitors the analogue G sensor output signal. If the CPU
judges that the side-airbags and curtain air bags should be deployed, it sends
a fire signal to the SRS-ECU to deploy the side-airbags and curtain air bags.
In addition, the CPU diagnoses the internal components of the side impact
sensor. If a malfunction occurs, it requests the SRS-ECU to set a diagnosis
code.
DIAGNOSIS CODE SET CONDITIONS
These diagnosis codes are set if
communication between the side impact sensor (RH) and the SRS-ECU is not
possible or communication is faulty.
PROBABLE CAUSES
- Damaged wiring harnesses or connectors
- Malfunction of the side impact sensor (RH)
- Malfunction of the SRS-ECU
|
STEP 1. M.U.T.-III CAN bus diagnostics
|
|
Use the M.U.T.-III to diagnose the CAN bus
lines.
|
|
Q.
Is the check result normal?
|
|
Go to Step 2.
|
|
|
|
Repair
the CAN bus line (Refer to GROUP 54F, Diagnosis ).
|
|
|
|
STEP 2. Check whether the diagnosis code is reset.
|
|
Check again if the diagnosis code is
set.
|
|
(1)Erase the diagnosis code.
|
|
(2)Ignition: LOCK (OFF) position to ON
|
|
(3)On completion, check that the diagnosis code is not
reset.
|
|
Q.
Is the diagnosis code set?
|
|
Go to Step 3.
|
|
|
|
There
is an intermittent malfunction such as poor engaged connector(s) or open
circuit (Refer to GROUP 00, How to Cope with Intermittent Malfunction ).
|
|
|
|
STEP 3.Check the side impact sensor (RH) (M.U.T.-III diagnosis
code).
|
|
(1)Disconnect the negative battery terminal.
|
|
(2)Replace the side impact sensor (RH) with the side impact
sensor (LH).
|
|
(3)Connect the negative battery terminal.
|
|
(4)Erase diagnosis code memory, and check the diagnosis
code.
|
|
Q.
Is diagnosis code B1438 or B1439 set?
|
|
Replace the side impact sensor
(RH) with a new one (Refer to ). Then go to Step 5.
|
|
|
|
Go to Step 4.
|
|
|
|
STEP 4. Check the harness wires for open circuit or short circuit
between SRS-ECU connector C-118 (terminal No.63 and 64) and side impact
sensor (RH) connector D-01 (terminal No.1 and 2).
|
![](../../../img/52/AC311438AC00ENG.png)
![](../../../img/52/AC303164AC00ENG.png)
|
Q.
Is the check result normal?
Go to Step 5.
Repair the harness wires between
SRS-ECU connector C-118 (terminal No.63 and 64) and side impact sensor (RH)
connector D-01 (terminal No.1 and 2).
|
|
STEP 5. Check whether the diagnosis code is reset.
|
|
Q.
Is diagnosis code B1428 or B1429 set?
|
|
Replace the SRS-ECU (Refer to ).
|
|
|
|
An
intermittent malfunction is suspected (Refer to GROUP 00, How to Use
Troubleshooting/Inspection Service Points ).
|
|
|