BULB REPLACEMENT


HEADLAMP BULB <LOW-BEAM> REPLACEMENT <VEHICLES WITHOUT DISCHARGE HEADLAMP>
1.Disconnect the connector.

2.Twist the cover to remove.
3.Withdraw the socket from the bulb.
4.
caution Don’t touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.
Remove the spring to withdraw the bulb.

HEADLAMP BULB <HIGH-BEAM> REPLACEMENT
1.Disconnect the connector.

2.Twist the cover to remove.
3.
caution Don’t touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.
Twist the socket to remove.

POSITION LAMP BULB REPLACEMENT


caution Don’t touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.

Disconnect the connector, and twist the position lamp socket to remove it.

FRONT TURN-SIGNAL LAMP BULB REPLACEMENT
caution Don’t touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.

Disconnect the connector, and twist the front turn-signal lamp socket to remove it.