![](../../../img/54/AC303130AA00ENG.png)
|
1.Remove the under cover and
the splash shield assembling clips as shown.
|
![](../../../img/54/AC313561AC00ENG.png)
|
2.
caution |
Don’t touch the bulb
surface with bare hands
or dirty gloves. If the bulb surface (glass
part) gets dirty, clean it with alcohol or
thinner
immediately and dry well, and then install
it.
|
Disconnect the connector and withdraw the
bulb. 3.Replace the valve, and connect securely
the connector.
|