REMOVAL AND INSTALLATION


warning
  • Before removal of the air bag module, refer to GROUP 52B, Service Precautions () and Driver’s, Front Passenger’s Air Bag Module(s) and Clock Spring ().
  • When removing and installing the steering wheel, do not let it bump against the air bag module.




Removal steps


·
 Gearshift lever knob <M/T> (Refer to GROUP 22A, Transmission Control ).


·
 Selector lever knob <A/T> (Refer to GROUP 23A, Transmission Control ).


·
 Selector lever panel (Refer to GROUP 52A, Instrument Panel Assembly ).


·
 Front scuff plate inner, Cowl side trim (Refer to GROUP 52A, Interior Trim ).


·
 Fuel filler lid lock release handle (Refer to GROUP 42, Fuel Filler Lid ).


·
 Lower panel (Refer to GROUP 52A, Instrument Panel Assembly ).


1.
 Steering column cover (Refer to GROUP 52A, Instrument Panel Assembly ).


2.
 Steering wheel (Refer to GROUP 37, Steering Wheel ).


3.
 Clock spring and column switch assembly (Refer to GROUP 37, Steering Shaft and GROUP 52B, Driver’s, Front Passenger’s Air Bag Module(s) and Clock Spring ).


4.
 Ignition Switch


5.
 Key reminder switch


6.
 Immobilizer-ECU and key ring antenna assembly <Vehicles with engine immobilizer system>
<<A>>
7.
 Steering lock cylinder

REMOVAL SERVICE POINT

<<A>> STEERING LOCK CYLINDER REMOVAL
1.Insert the key in the steering lock cylinder and turn it to the "ACC" position.

2.Using a small Phillips head screwdriver, pull the steering lock cylinder toward you.