| caution | During diagnosis, a diagnosis code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all. |
| caution | When the battery cable is disconnected or the combination meter is removed, the fuel gauge learned value will be erased. To let the display unit re-learn it, enter the vehicle speed (by driving the vehicle or entering simulated vehicle speed) and then stop the vehicle. |
| Trouble symptom |
Inspection procedure number |
Reference page |
| Communication with the M.U.T.-III is not possible. |
1 |
|
| Power supply circuit. |
2 |
|
| Odometer and trip meter are not displayed. |
3 |
|
| All the needle meters do not work. |
4 |
|
| When the ignition switch is turned to the ON position, the indicator and warning lamps do not illuminate. |
5 |
|
| Speedometer does not work (other meters work). |
6 |
|
| The fuel gauge needle moves excessively. |
7 |
|
| Tachometer does not work (other meters work). |
8 |
|
| Fuel Gauge does not work (other meters work). |
9 |
|
| Engine coolant temperature gauge does not work (other meters work). |
10 |
|