CUSTOMIZE FUNCTION



Using M.U.T.-III adjusts the following function. The programmed information is held even when the battery is disconnected.

  • Auto lamp function sensor sensitivity (illumination intensity)
    When the lighting switch is in the AUTO position, the position lamp and headlamp illuminate automatically depending on the ambient brightness level.
  • Headlamp automatic-shutdown function
    To prevent the headlamp from being left illuminated, the headlamp is turned off automatically when opening the driver’s door, if the ignition switch is turned to the LOCK (OFF) position with the lighting switch in the TAIL or HEAD position.
  • Vehicle speed-dependent wiper function
    With the windshield wiper switch in the intermittent position, the intermittent duration changes depending on the intermittent adjusting knob position and the vehicle speed.
  • Electric folding door mirror automatic unfolding function
    Driving with the door mirror retracted resets the door mirror automatically. The door mirrors can be folded and unfolded using another method.
  • Horn answer back function of the keyless entry system
    When lock/unlock is operated with the keyless entry transmitter, the horn sounds so that the driver can recognize the lock/unlock status of the vehicle even if the driver is away from it.
  • Power window operation in multimode keyless entry system
    From near by vehicle, the driver can actuate power window by operating the keyless entry transmitter.
  • Security alarm
    Operative/inoperative state of the security alarm function is selected.
  • The selector "P" position-linked central door unlocking function
    When the selector lever is shifted to the "P" position, all the doors unlock.
  • Turn-signal lamp operation sound function
    Synchronized with the hazard lamp and the turn signal lamp, the buzzer sounds.
  • Dimmer interior lamp control duration
    When the door is closed with the ignition switch LOCK (OFF), the interior lamp is turned OFF automatically in the specified time.
  • Power window timer function duration
    Even after turning LOCK (OFF) the ignition switch, the power window can be operated for the specified time.
  • Power window main switch operation control during power window timer activation
    During power window timer activation, only the driver’s power window can be operated, using the power window main switch.
  • Timer lock time after executing the keyless entry unlock
    If any door including a tailgate is not opened after being unlocked with the keyless transmitter, doors are locked automatically within the specified time.
  • Door-ajar warning function
    Driving with any door, including a tailgate, not properly closed sounds the buzzer to let the driver know the door-ajar state.
  • Wiper-linked auto lamp function
    If the lighting switch is set to AUTO, the headlamps illuminate irrelevant of the ambient brightness when the wiper is operated.
  • Rear wiper intermittent duration
    When the rear wiper switch is turned ON, the rear wiper operates in the intermittent action. When the rear wiper switch is turned from OFF to ON two cycles, the rear wiper makes continuous operation regardless of the intermittent operation duration setting.
  • Operation duration of interior lamp automatic-shutdown function
    This function automatically turns OFF the interior lamp after a specified time has elapsed, if the interior lamp is ON with the ignition switch in the LOCK (OFF) position.
  • Power window lock operation on the driver’s seat
    This function enables the driver to control the power windows other than the driver’s door power window with the power window main switch, when the power window lock switch incorporated in the power window main switch is pressed.
  • Wiper linked with washer function
    When this function is active, the windshield wiper operates if the washer switch is turned ON.
  • Hazard answer back function of the keyless entry system
    When lock/unlock is operated with the keyless entry transmitter, the horn sounds so that the driver can recognize the lock/unlock status of the vehicle even if the driver is away from it.
  • Initializing all functions (Returning to the initial condition)
    All adjusting functions are returned to the settings at the time of factory shipment.
Item No.
Items shown on M.U.T.-III screen
Item
Adjustment items shown on M.U.T.-III screen
Adjusting contents
1
PHOTO SENSOR
Auto lamp function sensor sensitivity (illumination intensity)
HIGH ILLUMIN.
High ambient brightness
STD ILLUMIN.
Standard ambient brightness (initial setting)
LOW ILLUMIN.
Low ambient brightness
LO LO ILLUMIN.
Low-low ambient brightness
2
H/L AUTO-CUT
Headlamp automatic-shutdown function
W.FUNCTION(A)
With function: The automatic tail lamp turn-off function with the ignition switch OFF (LOCK) is available.
W.FUNCTION(D)
With function: The automatic tail lamp turn-off function with the ignition switch OFF (LOCK) is not available. (Initial setting)
W/O FUNCTION
Without function
4
SPEED SEN WIP
Vehicle speed-dependent wiper function
W.FUNCTION
With function (Initial setting)
W/O FUNCTION
Without function
5
DOOR MIRROR
Electric folding door mirror automatic unfolding function
SPEED SEN FUN
Vehicle speed sensing reset (the initial condition)
IG-LINKED FUN
Ignition linked
KEYLESS LINK
Keyless entry linked
W/O FUNCTION
Without function
6*
KEYLESS(HORN)
Keyless entry horn answer-back
WHEN LOCKING
Sounds whenever locked
LOCKING TWICE
Sounds in two consecutive lock operations (within 1 second).
W/O FUNCTION
Without function (initial setting)
8*
KYLES(HRN)NIT
Keyless entry horn answer-back disabled at night
NORMAL
Activated according to customisation of the keyless entry horn answer back (initial setting)
PRHB A/L OFF
The keyless entry horn answer back basically operates according to the customised settings when the auto lamp switch is ON. At night, however, the horn answer back is disabled.
When the auto lamp switch is OFF, the horn answer back is disabled.
10
KEYLESS(P/W)
Keyless entry power window operation
OPEN/CLOSE
With function of close and open actions (the open action is for the power window only.)
CLOSE
With function the close action only (the initial condition)
W/O FUNCTION
Without activation
11
SECURITY ALM
Security alarm
HORN/HAZARD
With function: hazard and horn
HAZARD
With function: hazard only
W/O FUNCTION
Without function (driver can configure setting): Driver can change the setting in order of "HORN/HAZARD," "HAZARD," "W/O FUNCTION."
14
P UNLOCK ACT.
Door unlock function linked with "P" position shift for centre door lock system
W.FUNCTION
With function
P/W LCK INLCK
Power window lock switch OFF, with function
W/O FUNCTION
Without function (the initial condition)
15
T/SIG.BUZZER
Turn-signal lamp operation sound function
W.FUNCTION
With function
W/O FUNCTION
Without function (the initial condition)
16
RM LMP TN OFF
Dimmer interior lamp control duration
30s
30 seconds
15s
15 seconds (the initial condition)
7.5s
7.5 seconds
W/O FUNCTION
0 second (no delay action)
18
KEY-OFF TMR T
Power window (sunroof) timer function
W/O FUNCTION
Without the timer function
30s
30 seconds (the initial condition)
3min.
3 minutes
10min.
10 minutes
19
P/W KEY OFF T
Main switch operation rules during power window key off timer activation
NORMAL ACTION
All power windows can be operated using power window main switch during key-off timer activation. (initial setting)
M S/W RESTRC.
Operation of all power windows except driver's window using power window main switch is prohibited during key-off timer activation.
24
KEYLES LOCK T
Timer lock time after executing the keyless entry unlock
30s
30 seconds (the initial condition)
60s
1 minute
120s
2 minutes
180s
3 minutes
26
DOOR WARN BUZ
Door-ajar warning function
W.FUNCTION
With function (Initial setting)
W/O FUNCTION
Without function
CONTIN ACTION
Continuous operation
27
WIPR-LINK H/L
Wiper-linked auto lamp function
W/O FUNCTION
Without function (the initial condition)
W.FUNCTION
With function
28
R.INT WIPER T
Rear wiper intermittent duration
8s
8 seconds: Without continuous operation (Initial setting)
4s(W SUCSSON)
4 seconds: With continuous operation
8s(W SUCSSON)
8 seconds: With continuous operation
16s(W SUCSSON)
16 seconds: With continuous operation
CONTIN ACTION
Continuous operation (without the intermittence)
4s
4 seconds: Without continuous operation
16s
16 seconds: Without continuous operation
30
RM/L AUTO-CUT
Operation duration of interior lamp automatic-shutdown function
3min.
3 minutes
30min.
30 minutes (the initial condition)
60min.
60 minutes
W/O FUNCTION
Without function
31
P/W LOCK MODE
Power window lock operation on the driver’s seat
ALL SEATS OPE
Driver can operate power windows on all doors even when the power window lock is ON (Initial setting).
ONLY DR SEAT
Operating seats other than the driver’s seat is prohibited when lock is ON.
37
WIP SYCR WASH
Wiper linked with washer function
W.FUNCTION
With function (Initial setting)
W/O FUNCTION
Without function
39
TURN-SIGNAL
Turn signal lamp operation condition adjustment function
IG-ON
Turn signal lamp can be operated when the ignition switch is turned ON (Initial setting).
IG-ACC
Turn signal lamp can be operated when the ignition switch 1 is in ACC or ON position.
40
KEYLES HAZERD
Keyless entry hazard answer-back flashing pattern adjustment function
LOCK1,UNLOCK2
LOCK: Flash once, UNLOCK: Flash twice (Initial setting)
LOCK1, UNLOCK0
LOCK: Flash once, UNLOCK: No flash
LOCK0, UNLOCK2
LOCK: No flash, UNLOCK: Flash twice
LOCK2, UNLOCK1
LOCK: Flash twice, UNLOCK: Flash once
LOCK2, UNLOCK0
LOCK: Flash twice, UNLOCK: No flash
LOCK0, UNLOCK1
LOCK: No flash, UNLOCK: Flash once
NO BLINK
No flashing
note * can be adjusted only when the optional headlamp manner switch is installed. After the headlamp manner switch is installed and operated once, the customization menu is available. If all the functions have been initialised, the related adjustment items will also be cleared. In this case, however, these items can be displayed again on the screen by turning on the headlamp manner switch.