|
Input signal from the ignition
switch (IG1) is used to operate the functions below. If
the signal is abnormal, these functions will not work
normally.
|
|
- Lamp reminder function
- Door-ajar warning buzzer function
- Turn-signal lamp operation sound function
- Power window
- Ignition key cylinder illumination lamp
- Seat belt indicator
- Head and tail lamps
- Headlamp automatic-shutdown function
- Turn-signal lamp
- Interior lamps
- Interior lamp automatic-shutdown function
|
|
- Malfunction of the ETACS-ECU
- Damaged harness wires and connectors
|
![](../../../img/54/AC313400AD00ENG.png)
![](../../../img/54/AC313410AD00ENG.png)
|
Q.
Is the check result normal?
Go to Step
2.
Repair
the defective connector.
|
![](../../../img/54/AC313400AD00ENG.png)
![](../../../img/54/AC313410AD00ENG.png)
|
(1)Remove the ETACS-ECU, and
measure at the junction block side. (2)Ignition switch:
ON position
|
![](../../../img/54/AC312731AC00ENG.png)
|
(3)Voltage between C-219 ETACS-ECU
connector terminal No.8 and body earth OK:
System voltage
Q.
Is the check result normal?
Go to Step
4.
Go to Step
3.
|
![](../../../img/54/AC313398AM00ENG.png)
![](../../../img/54/AC313408AL00ENG.png)
|
note |
Prior to the wiring harness
inspection, check junction block connector
C-202, and repair
if necessary.
|
- Check the power supply line for open
circuit.
Q.
Is the check result normal?
The trouble can be
an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
Repair the wiring
harness.
|
|
Check that the ignition switch
(IG1) signal is received normally.
|
|
Q.
Is the check result normal?
|
|
The trouble can be
an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
|
|
|