|
Input signal from the front door
switch (RH) is used to operate the functions below. If
the signal is abnormal, these functions will not work
normally.
|
|
- Lamp reminder function
- Headlamp automatic-shutdown function
- Room lamps
|
|
- Malfunction of the driver’s door
switch
- Malfunction of the ETACS-ECU
- Damaged harness wires and connectors
|
|
Check that the front door switch
(RH) is installed on the body correctly.
|
|
Q.
Is the check result normal?
|
|
Correct the
installation condition.
|
|
|
![](../../../img/54/AC313429AG00ENG.png)
|
Q.
Is the check result normal?
Go to Step
3.
Repair
the defective connector.
|
|
Refer to GROUP 42 - Door .
|
|
Q.
Is the check result normal?
|
|
Replace the front
door switch (RH).
|
|
|
![](../../../img/54/AC313421AC00ENG.png)
|
Q.
Is the check result normal?
Go to Step
5.
Repair
the defective connector.
|
![](../../../img/54/AC313418AJ00ENG.png)
|
note |
Prior to the wiring harness
inspection, check joint connector C-210, and
repair if necessary.
|
- Check the input line for open circuit.
Q.
Is the check result normal?
Go to Step
6.
Repair
the wiring harness.
|
|
Check that the front door switch
(RH) signal is received normally.
|
|
Q.
Is the check result normal?
|
|
The trouble can be
an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
|
|
|