|
Input signal from the column switch (lighting
and turn-signal lamp switch) is used to
operate the functions below. If the signal is abnormal, these functions
will not work normally.
|
|
- Lamp reminder function
- Headlamp and tail lamp
- Fog lamp
- Turn signal lamp
- Headlamp washer
|
|
- Malfunction of the column switch
- Damaged harness wires and connectors
|
|
Check that the wiper and washer switch
connector, the lighting switch connector and the
switch body connector are in good condition.
|
|
Q.
Is the check result normal?
|
|
Repair
the defective connector.
|
|
|
|
Refer to GROUP 54A - Column switch .
|
|
Q.
Is the check result normal?
|
|
Replace the column switch.
|
|
|
|
Check that the ETACS-ECU sets a diagnosis
code.
|
|
Q.
Is the diagnosis code set?
|
|
Refer
to diagnosis code chart .
|
|
|
|
Replace the column switch, and check if the
column switch (lighting and turn-signal lamp
switch) sends signal.
|
|
(1)Replace the column switch.
|
|
(2)Check if the column switch (lighting and turn-signal
switch) sends signal.
|
|
Q.
Is the check result normal?
|
|
The
procedure is complete.
|
|
|