INSPECTION PROCEDURE C-3: The central door lock switch (incorporated with the power window main switch) fails to perform central door locking operation.


caution Whenever the ECU is replaced, ensure that the input and output signal circuits are normal.


COMMENTS ON TROUBLE SYMPTOM
If this function does not work normally, the input signal circuit(s) of the central door lock switch (incorporated with the power window main switch) or the ETACS-ECU may be defective.

POSSIBLE CAUSES

  • The central door lock switch (incorporated with the power window main switch) is defective.
  • Malfunction of the ETACS-ECU
  • Damaged harness wires and connectors

DIAGNOSIS PROCEDURE

Step 1. ETACS switch data by using the SWS monitor
Check the ETACS-ECU signal, which is related to the central door locking system.

  • Door lock switch: Neutral to lock
Item No.
 Item name
 Normal condition
Item 26
 CNTR DOOR LCK
 ON (only when operated to lock)
Item 27
 CNTR DOOR ULK
 OFF
OK: Normal conditions are displayed for all the items.

Q. Are the check result normal?
Go to step 2 .
Refer to Inspection Procedure P-15 "The signals from the central door locking switch (integrated in power window main switch) are not received ."

Step 2. Retest the system.
Check that the central door lock switch (incorporated with the power window main switch) works normally.

Q. Is the check result normal?
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).
Replace the ETACS-ECU.