HOW TO CONNECT THE SWS MONITOR


caution Always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting the SWS monitor and the M.U.T.-III.

HOW TO CONNECT THE SWS COMMUNICATION LINE <SPECIAL TOOL SWS MONITOR HARNESS (FOR COLUMN-ECU) MB991812>

1.Remove the steering column cover.
2.Remove the steering column switch connector.
3.Connect special tool SWS monitor harness (for column-ECU) MB991812.

<WHEN CONNECTING THE DIAGNOSIS CONNECTOR BY USING THE INTERMEDIATE WIRES FOR SWS MONITOR CUSTOMISATION>

1.Connect the special tool Intermediate wires (MB991960) for SWS monitor customisation to the special tool M.U.T.-III main harness A (MB991910).
2.Connect the M.U.T.-III main harness A (with the intermediate wires) to the special tool V.C.I. (MB991824) .
3.Connect the intermediate wires for SWS monitor customisation to the the diagnosis connector and the SWS monitor cartridge.

HOW TO ESTABLISH COMMUNICATION BETWEEN DOORS

1.Connect special tool SWS monitor harness (for column-ECU) MB991812 to special tool adapter harness for door communication MB991896.
2.Connect special tool Probe harness MB991822 to special tool adapter harness for door communication MB991896 assembled in step 1.
3.Confirm that all the harnesses are connected. Then insert the probe of special probe harness MB991822 to each female connector terminal on special tool adapter harness for door communication MB991896 by backprobing.
note For the connectors and their terminal numbers on the door communication line for the probe to insert, refer to the reference table.

Reference table of connectors and their terminal numbers on door communication line
Insert the probe of the probe harness to each female connector terminal on the door communication line by backprobing.
Connector name
 Connector number
 Terminal No.
Intermediate connector
 Instrument panel wiring harness and front door wiring harness (RH) combination
 C-14 [Front door wiring harness (RH) side]
 3
Instrument panel wiring harness and floor wiring harness combination
 C-16 (Instrument panel wiring harness side)
 29
Instrument panel wiring harness and front door wiring harness (LH) combination
 C-27 [Front door wiring harness (LH) side]
 5
Floor wiring harness and rear door wiring harness (RH) combination
 D-03 [Floor wiring harness side]
 8
Floor wiring harness and rear door wiring harness (LH) combination
 D-16 [Floor wiring harness side]
 8
Power window main switch
 E-05
 11
Power window sub switch (front, LH)
 E-26
 6
Power window sub switch (rear RH)
 E-18
 6
Power window sub switch (rear LH)
 E-02
 6