PULSE CHECK


caution Before connecting or disconnecting the M.U.T.-III, turn the ignition switch to the "LOCK" (OFF) position.

  1. The input signals (signals other than communication line signals), which are compatible with the SWS monitor by using the M.U.T.-III or voltmeter, can be confirmed by the Pulse Check.
    note If a problem is found in the "Pulse Check", refer to the Problems during Input Signal Check <Service data, function diagnosis or pulse check> (Refer to ).
  2. Use the M.U.T.-III or voltmeter to check the following input signals.

SWITCHES WHICH ARE APPLICABLE TO INPUT SIGNAL CHECK, AND THEIR CHECK CONDITIONS
Input signal
 Requirements for sounding buzzer
Inhibitor switch ("R" position)
 When the ignition switch is turned ON and the selector lever is moved to the R position.