CHECK TROUBLE BY USING THE INPUT SIGNAL CHECK



<Data list, function diagnosis or pulse check>
If a problem is found in the Service Data or Pulse Check inspection, observe the table below.
Symptom
Inspection procedure number
Reference page
The ignition switch (ACC) signal is not received.
P-1

The ignition switch (IG1) signal is not received.
P-2

The fog lamp switch signal is not received.
P-3

The driver’s door switch signal is not received.
P-4

Column switch (lighting and turn-signal lamp switch)
The tail lamp switch signal is not received.
P-5

The headlamp switch signal is not received.
The dimmer switch signal is not received.
The passing switch signal is not received.
The turn-signal lamp switch (LH) signal is not received.
The turn-signal lamp switch (RH) signal is not received.
Column switch (windshield wiper/washer and rear wiper washer switch)
The windshield mist wiper switch signal is not received.
P-6

The windshield intermittent wiper switch signal is not received.
The windshield low-speed wiper switch signal is not received.
The windshield high-speed wiper switch signal is not received.
The windshield washer switch signal is not received.
The rear wiper switch signal is not received.
The rear washer switch signal is not received.
The windshield intermittent wiper volume signal is not received.
P-7

Power window main switch
When the power window main switch is operated, the switch signals are not received.
P-8

Sunroof
When the sunroof switch is operated, the switch signals are not received.
P-9

The key reminder switch signal is not received.
P-10

The hazard warning lamp switch signal is not received.
P-11

All the door switch signals are not received.
P-12

The driver’s door lock actuator switch signal is not received.
P-13

The driver’s door lock key switch signal is not detected.
P-14

The signal from the central door lock switch (incorporated with the power windows main switch) is not received.
P-15

The tailgate lock release handle signal is not received.
P-16

Signal is not received from the remote controlled mirror switch (folding/unfolding switch).
P-17

The interior lamp "all on" or "all off" switch signal is not sent to the ETACS-ECU.
P-18

The hood switch signal is not received.
P-19

Each switch signal of the keyless entry transmitter is not received.
P-20

Interior lamp loaded signal is not detected.
P-21

The vehicle speed signal is not received.
P-22

No photo sensor signal is received.
P-23