|
Input signal from the tailgate lock
release handle is used to operate the central door locking
function. If the signal is abnormal, the central door
locking function will not work normally.
|
|
- Malfunction of the tailgate lock release
handle
- Malfunction of the ETACS-ECU
- Damaged harness wires and connectors
|
![](../../../img/54/AC313481AJ00ENG.png)
|
Q.
Is the check result normal?
Go to Step
2.
Repair
the defective connector.
|
|
Refer to GROUP 42 -
Tailgate .
|
|
Q.
Is the check result normal?
|
|
Replace the tailgate
lock release handle.
|
|
|
![](../../../img/54/AC313481AJ00ENG.png)
|
(1)Disconnect the connector, and
measure at the wiring harness side.
|
![](../../../img/54/AC312730AL00ENG.png)
|
(2)Resistance between G-06 tailgate
lock release handle connector terminal No.2 and body
earth OK: 2 Ω or less
Q.
Is the check result normal?
Go to Step
5.
Go to Step
4.
|
![](../../../img/54/AC313481AD00ENG.png)
|
note |
Prior to the wiring harness
inspection, check intermediate connector G-14,
and repair if necessary.
|
- Check the earth wires for open circuit.
Q.
Is the check result normal?
The trouble can be
an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
Repair the wiring
harness.
|
![](../../../img/54/AC313421AB00ENG.png)
|
Q.
Is the check result normal?
Go to Step
6.
Repair
the defective connector.
|
![](../../../img/54/AC313416AJ00ENG.png)
![](../../../img/54/AC313481AD00ENG.png)
|
note |
Prior to the wiring harness
inspection, check intermediate connector C-16,
G-14 and repair if necessary.
|
- Check the input line for open circuit.
Q.
Is the check result normal?
Go to Step
7.
Repair
the wiring harness.
|
|
Check that the tail gate lock
release handle switch signal is received normally.
|
|
Q.
Is the check result normal?
|
|
The trouble can be
an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
|
|
|