REMOVAL AND INSTALLATION <R.H.D. FRONT SIDE>


Pre-removal and Post-installation Operation
  • Refrigerant Draining and Refilling (Refer to Charging and Discharging .)




Removal steps
<<A>>
1.
 A/C pressure sensor
<<A>>
2.
 Flexible discharge hose
<<A>>
3.
 Liquid pipe A
<<A>>
4.
 Flexible suction hose
<<A>>
5.
 Suction pipe A <Vehicles without rear cooler and dual automatic A/C>
<<A>>
6.
 Suction pipe B connection <Vehicles with rear cooler or dual automatic A/C>
<<A>>
7.
 Suction pipe A <Vehicles with rear cooler or dual automatic A/C>
<<A>>
8.
 Liquid pipe B <Vehicles without rear cooler and dual automatic A/C>
<<A>>
9.
 Liquid pipe C connection <Vehicles with rear cooler or dual automatic A/C>
<<A>>
10.
 Liquid pipe B <Vehicles with rear cooler or dual automatic A/C>
<<A>>
11.
 Expansion valve


12.
 O ring

REMOVAL SERVICE POINT

<<A>> HOSE/PIPE DISCONNECTION
caution As the compressor oil and receiver are highly moisture absorbent, use a non-porous material to plug the hose and nipples.
To prevent the entry of other foreign bodies, plug the condenser, compressor, and expansion valve nipples.