REMOVAL AND INSTALLATION



Pre-removal and Post-installation Operation
  • Refrigerant draining and Refilling (Refer to Charging and Discharging .)
  • Battery and Battery tray
  • Air cleaner intake duct (Refer to GROUP 15, Air Cleaner .)




Removal steps


1.
 Front bumper clip


2.
 Front end upper bar
<<A>>
3.
 Flexible discharge hose connection
<<A>>
4.
 Liquid pipe A connection


5.
 O-ring
<<B>>
6.
 Condenser


·
 Front bumper (Refer to GROUP 51, Front Bumper Assembly .)


7.
 Air guide panel center
note Condenser fan removal and installation (Refer to GROUP 14, Radiator ).

REMOVAL SEVICE POINTS

<<A>> FLEXIBLE SUCTION HOSE AND LIQUID PIPE A REMOVAL
caution Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.
Plug the removed nipple of the pipe, hose and condenser to prevent the entry of dust and dirt.

<<B>> CONDENSER ASSEMBLY REMOVAL

Remove the condenser while pushing the radiator towards the direction shown to make room.