Connector symbol
|
Name
|
Reference page
|
Description of change
|
A
|
ENGINE COMPARTMENT <LHD>
|
![](../../../buttons/03btn007.png)
|
- Due to the change of the cooling fan,
the following connectors have been added or changed.
- Cooling fan control relay (A-05X) has been added.
- Cooling fan motor (A-109) <Vehicles for Morroco> has been added.
- The applicable specification for the cooling fan motor (A-110) has been changed
to <Except vehicles for Morroco>.
- Due to the introduction of the discharge headlamp, the following connectors
have been added.
- Headlamp assembly (LH) (A-37)
- Headlamp assembly (RH) (A-38)
- Due to the introduction of the ASC, the following connectors have been changed.
- The applicable specification for the ABS-ECU (A-117) has been changed to <Except
for vehicles for GCC>.
- ASC-ECU (A-119) <Vehicles for GCC> has been added.
|
ENGINE COMPARTMENT <RHD>
|
B
|
ENGINE AND TRANSMISSION
|
![](../../../buttons/03btn007.png)
|
- The color of the CVT assembly (B-109) connector has
been changed from black to gray.
|
C
|
INSTRUMENT PANEL <LHD>
|
![](../../../buttons/03btn007.png)
|
- The number of the instrument panel wiring harness and
front door wiring harness (RH) combination (C-11) connector terminals has been reduced from
13 to 14.
- The number of the instrument panel wiring harness and front door wiring harness
(LH) combination (C-23) connector terminals has been reduced from 13 to 14.
- The number of the instrument panel wiring harness and roof wiring harness
combination (C-32) connector terminals has been reduced from 10 to 14.
- J/C(14) (C-134) has been added.
- J/C(15) (C-135) has been added.
- Clutch interlock switch (for starter relay) <M/T> (C-223)
has been changed to no connection.
- Clutch interlock switch (for starter relay) <M/T> (C-234)
has been added.
- Due to the change of the supplemental restraint system (SRS), the following
connectors have been added or changed.
- The number of the SRS-ECU (C-19) connector terminals has been reduced from
23 to 28.
- The number of the SRS-ECU (C-20) connector terminals has been reduced from 8 to
20.
- Due to the introduction of the ASC, the following connectors have been added.
- ASC off switch (C-129)
- Steering wheel sensor (C-311)
|
C
|
INSTRUMENT PANEL <RHD>
|
![](../../../buttons/03btn007.png)
|
- The number of the instrument panel wiring harness and
front door wiring harness (RH) combination (C-11) connector terminals has been reduced from
13 to 14.
- The number of the instrument panel wiring harness and front door wiring harness
(LH) combination (C-23) connector terminals has been reduced from 13 to 14.
- The number of the instrument panel wiring harness and roof wiring harness
combination (C-32) connector terminals has been reduced from 10 to 14.
- The color of the air mixing damper control motor and potentiometer (C-119)
connector has been changed from milk white to black.
- J/C(14) (C-134) has been added.
- J/C(15) (C-135) has been added.
- Clutch interlock switch (for starter relay) <M/T> (C-223)
has been changed to no connection.
- Clutch interlock switch (for starter relay) <M/T> (C-234)
has been added.
- Due to the discontinue of the Multivision display the following connectors
have been added or changed.
- Instrument panel wiring harness and multivision display wiring harness (C-06)
has been changed to no connection.
- Due to the change of the supplemental restraint system (SRS), the following
connectors have been added or changed.
- The number of the SRS-ECU (C-19) connector terminals has been reduced from
23 to 28.
- The number of the SRS-ECU (C-20) connector terminals has been reduced from 8 to
20.
|
D
|
FLOOR <LHD>
|
![](../../../buttons/03btn007.png)
|
- The color of the Rear wheel speed sensor (RH) (D-03)
connector has been changed from milk white to gray.
- The color of the Rear wheel speed sensor (LH) (D-12) connector has been changed
from milk white to gray.
- Due to the change of the sheet belt warning buzzer circuit, front seat belt
switch (passenger’s side) (D-35) has been added.
|
|
FLOOR <RHD>
|
|
- The color of the Rear wheel speed sensor (RH) (D-03)
connector has been changed from milk white to gray.
- The color of the Rear wheel speed sensor (LH) (D-12) connector has been changed
from milk white to gray.
- Due to the change of the sheet belt warning buzzer circuit, front sheet belt
switch (D-26) has been added.
|
F
|
DOOR <LHD>
|
![](../../../buttons/03btn007.png)
|
- The color of the power window main switch <Vehicles
with safety system> (F-04) connector has been changed from milk white to black.
|
DOOR <RHD>
|
![](../../../buttons/03btn007.png)
|