REMOVAL AND INSTALLATION

<M/T>

			Crankshaft front oil seal removal steps
		·	Crankshaft pulley (Refer to ).
	>>C<<	1.	Front oil seal
			Crankshaft rear oil seal removal steps
		·	Transmission assembly (Refer to GROUP 22A - Transmission Assembly ).
		·	Clutch cover and disc (Refer to GROUP 21B - Clutch ).
		·	Oil pan (Refer to ).
<<A>>	>>B<<	2.	Flywheel bolt
		3.	Flywheel
	>>A<<	4.	Oil seal case

<CVT>

			Crankshaft front oil seal removal steps
		·	Crankshaft pulley (Refer to ).
	>>C<<	1.	Front oil seal
			Crankshaft rear oil seal removal steps
		·	Transmission assembly (Refer to GROUP 23A - Transmission Assembly ).
		·	Oil pan (Refer to ).
<<A>>	>>B<<	2.	Drive plate bolt
		3.	Adapter plate
		4.	Drive plate
	>>A<<	5.	Oil seal case

REMOVAL SERVICE POINT

<<A>> FLYWHEEL BOLT/DRIVE PLATE BOLT REMOVAL

For the removal procedure, refer to GROUP 11B - Crankshaft and Cylinder Block

INSTALLATION SERVICE POINTS

>>A<< OIL SEAL CASE INSTALLATION

For the installation procedure, refer to GROUP 11B - Crankshaft and Cylinder Block

>>B<< FLYWHEEL BOLT/DRIVE PLATE BOLT INSTALLATION

For the installation procedure, refer to GROUP 11B - Crankshaft and Cylinder Block

>>C<< FRONT OIL SEAL INSTALLATION

1.Apply a small amount of engine oil to the outer circumference of special tool crankshaft front oil seal guide (MB991993) and install it to the crankshaft.
2.Apply a small amount of engine oil to the entire inner circumference of the oil seal lip.
3.

caution

When installing the front oil seal, be careful to avoid damage to the front oil seal.

Using special tool differential oil seal installer (MB990699), drive the oil seal so that it is flush with the timing chain case.