|
1.Remove the rear seat
cushion assembly (Refer to GROUP 52A - Rear Seat
Assembly ).
|
![](../../../img/13/ACB03105AB00ENG.png)
|
2.Remove the inspection
lid.
|
![](../../../img/13/ACB03106AB00ENG.png)
|
3.Disconnect the fuel tank
pump and gauge assembly connector. 4.Crank the
engine for at least two seconds. 5.If the engine
is not started, turn the ignition switch to the "LOCK" (OFF)
position. 6.If the engine is started, turn the
ignition switch to the "LOCK" (OFF) position after
the engine stopped. 7.Connect the fuel tank pump
and gauge assembly connector. 8.Install the
inspection lid. 9.Install the rear seat cushion
assembly (Refer to GROUP 52A - Rear Seat Assembly ).
|