|
1.Remove the fuel filler
cap.
|
|
2.Check the operating of the
fuel tank pump by M.U.T.-III to force-drive the fuel tank
pump.
note |
As the fuel tank pump is an
in-tank type, the fuel tank pump sound is hard
to hear. Then
check the sound from the tank inlet.
|
|
|
3.Install the fuel filler
cap.
|
![](../../../img/13/ACB03105AB00ENG.png)
![](../../../img/13/ACB03106AB00ENG.png)
![](../../../img/13/ACB03107AA00ENG.png)
|
4.If the fuel tank pump will
not operate, check by using the following procedure. If
normal, check the fuel tank pump drive circuit. (1)
Turn the ignition switch to the "LOCK" (OFF)
position. (2)
Remove the rear seat cushion assembly (Refer to GROUP 52A
- Rear Seat Assembly ). (3)
Remove the inspection lid. (4)
Disconnect the fuel tank pump and gauge assembly
connector. (5)
Remove the fuel filler cap. (6)
When the fuel tank pump and gauge assembly connector
terminal is connected directly to
the battery, check if the sound of the fuel tank pump
operation can be heard. If no operating
sound is heard, replace the fuel tank pump (Refer to GROUP
13B - On-vehicle Service,
Fuel Tank Pump and Gauge Assembly Replacement ).
|
note |
As the fuel tank
pump is an in-tank type, the fuel
tank pump sound is hard to hear.
Then
check the sound from the tank
inlet.
|
|
(7)
Install the fuel filler cap. (8)
Check for fuel pressure by pinching the fuel hose with
fingertips. (9)
Connect the fuel tank pump and gauge assembly
connector. (10)
Install the inspection lid. (11)
Install the rear seat cushion assembly (Refer to GROUP 52A
- Rear Seat Assembly ).
|