| If it is not in this list: Click |
|
| caution | During troubleshooting if the ignition switch
is turned to "ON" with the connectors, etc. disconnected, some diagnosis code may be saved in
other system. After the troubleshooting is completed, always make sure the diagnosis codes of
the entire systems. If it is found that some diagnosis codes have been set, erase them. |
| Inspection Procedure No. |
Inspection Item |
Reference Page |
| 18 |
Overheating |
|
| 24 |
Fan control relay system |
|
| If it is not in this list: Click |
|