|
Q.
Is diagnosis code stored?
|
|
Inspection chart for diagnosis code (Refer to ).
|
|
|
|
<Crank angle sensor>
- Use the test harness (MB991709) to connect crank angle sensor connector, and measure
at the pick-up harness.
- Engine: Idling
- Transmission: Neutral <M/T>, P range <CVT>
- Voltage between terminal engine-ECU SGT line and earth.
|
|
<Camshaft position sensor>
- Use the test harness (MB991709) to connect camshaft position sensor connector, and
measure at pick-up harness.
- Engine: Idling
- Transmission: Neutral <M/T>, P range <CVT>
- Voltage between terminal engine-ECU SGC line and earth.
|
|
OK: The timings on the output wave pattern at the both sensors should be the same
as the specification in the inspection procedure using an oscilloscope (Refer to ).
|
|
Q.
Is the check result normal?
|
|
Q.
Does the trouble symptom persist?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Replace the inlet camshaft.
|
|
|
|
- After replacing the crank angle sensor, re-check the trouble symptoms.
|
|
Q.
Does the trouble symptom persist?
|
|
Q.
Does the trouble symptom persist?
|
|
- After replacing the crankshaft sensing ring, re-check the trouble symptoms.
|
|
Q.
Does the trouble symptom persist?
|