REMOVAL AND INSTALLATION


caution
  • When removing or installing the crank angle sensor, be careful not to apply impact to the sensor.
  • Do not reuse the crank angle sensor that has been dropped.
Pre-removal Operation <Vehicles with A/C and Cooler>
  • Drive Belt Removal (Refer to GROUP 11A - Crankshaft Pulley ).
  • A/C Compressor and Clutch Assembly Removal (Refer to GROUP 11A - Engine Assembly ).

 Post-installation Operation <Vehicles with A/C and Cooler>
  • A/C Compressor and Clutch Assembly Installation (Refer to GROUP 11A - Engine Assembly ).
  • Drive Belt Installation (Refer to GROUP 11A - Crankshaft Pulley ).


For the removal and installation procedures, refer to GROUP 11B - Water Hose and Pipe .