|
1.Turn the ignition switch
to the "ON" position.
|
![](../../../img/17/ACB05987AB00ENG.png)
![](../../../img/17/ACD04308AB00ENG.png)
|
2.Push the cruise control
ON/OFF switch of the cruise control switches, and
check
that the cruise control indicator lamp within the
combination meter illuminates. 3.Push the cruise
control ON/OFF switch again, and check that the cruise
control
indicator lamp within the combination meter.
|
|
1.Turn the ignition switch
to the "ON" position.
|
|
2.Push the cruise control
ON/OFF switch (cruise control system: ON, cruise
control indicator lamp: illuminated.
|
|
3.Drive at the desired speed
within the range of approximately 40 km/h or
more.
|
![](../../../img/17/ACB05987AC00ENG.png)
|
4.Push the SET -
switch. 5.Check to be sure that when the SET
- switch is released the speed is the
desired constant speed.
note |
If the vehicle speed decreases
to approximately 15 km/h below the set
speed because
of climbing a hill for example, it is normal for
the cruise control to be cancelled. When the
vehicle speed is decelerated to the low speed
limit (approximately 40 km/h) or less,
the constant speed driving will be cancelled
even if the vehicle speed is not decelerated 15
km/h or more from the set speed.
|
|
|
1.Turn the ignition switch
to the "ON" position.
|
|
2.Push the cruise control
ON/OFF switch (cruise control system: ON, cruise
control indicator lamp: illuminated).
|
|
3.Set to the desired speed
within the range of approximately 40 km/h or
more.
|
![](../../../img/17/ACB05987AD00ENG.png)
|
4.Push the RES +
switch. 5.Check to be sure that acceleration
continues while the RES + switch is pushed,
and that the speed at the time it was released becomes the
constant driving speed.
note |
Acceleration can be continued
even if the vehicle speed has passed the high
speed limit.
But the constant driving speed when the RES
+ switch is released will be recorded as
the high speed limit.
|
|
|
1.Turn the ignition switch
to the "ON" position.
|
|
2.Push the cruise control
ON/OFF switch (cruise control system: ON, cruise
control indicator lamp: illuminated).
|
|
3.Set to the desired speed
within the range of approximately 40 km/h or
more.
|
|
5.Check to be sure that
deceleration continues while the SET - switch is
pushed,
and that the speed at the time it was released becomes the
constant driving speed.
note |
When the vehicle speed reaches
the low speed limit (approximately 40
km/h) during
deceleration, the cruise control will be
cancelled.
|
|
|
1.Turn the ignition switch
to the "ON" position.
|
|
2.Push the cruise control
ON/OFF switch (cruise control system: ON, cruise
control indicator lamp: illuminated).
|
|
3.Set to the desired speed
within the range of approximately 40 km/h or
more.
|
![](../../../img/17/ACB05987AE00ENG.png)
|
4.When any of the following
operations are performed while at constant speed during
cruise control, check if normal driving is resumed and
deceleration occurs.
note |
The accelerator pedal must NOT
be depressed.
|
(1)
The CANCEL switch is pushed. (2)
The brake pedal is depressed. 5.At a vehicle speed
of the low speed limit (approximately 40 km/h) or
higher,
check if when the RES + switch is pushed, the vehicle
speed returns to the speed before
cruise control driving was cancelled, and constant speed
driving occurs. 6.When the cruise control
ON/OFF switch is pushed again (cruise control system:
OFF) while driving at constant speed, check if normal
driving is resumed and deceleration occurs.
note |
The accelerator pedal must NOT
be depressed.
|
|