|
Using M.U.T.-III, perform CAN bus diagnosis (Refer to GROUP 54C -
Explanation
About The M.U.T-III Can Bus Diagnostics ).
|
|
Q.
Is the check result satisfactory?
|
|
Repair the CAN bus lines (Refer to GROUP 54C -
Troubleshooting, Can Bus
Diagnostic Table ). Then go to Step 6.
|
|
|
|
Using M.U.T.-III, perform CVT system diagnosis code (Refer to GROUP 23A -
Troubleshooting,
Diagnosis Function ).
|
|
Q.
Is any diagnosis code set?
|
|
Repair the CVT system (Refer to GROUP 23A -
Troubleshooting, Inspection
Chart for Diagnosis Code ). Then go to Step 6.
|
|
|
|
Using M.U.T.-III, perform MPI system diagnosis code (Refer to GROUP 13A -
Troubleshooting,
Diagnosis Function ).
|
|
Q.
Is any diagnosis code set?
|
|
Repair the MPI system (Refer to GROUP 13A -
Troubleshooting, Inspection
Chart for Diagnosis Code ). Then go to Step 6.
|
|
|
|
Using M.U.T.-III, check the data list (Refer to data list reference table ).
|
|
- Item 04: Vehicle speed signal
|
|
Q.
Is the check result normal?
|
|
Replace the engine-ECU (Refer to GROUP 13A -
Engine-ECU ).
Then go to Step 6.
|
|
|
|
Replace the engine-ECU (Refer to GROUP 13A -
Engine-ECU ).
Then go to Step 6.
|
|
|
|
It can be assumed that this malfunction is intermittent (Refer to GROUP 00 -
How
to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunction ).
|
|
|
|
The procedure is complete.
|
|
|