REMOVAL AND INSTALLATION


Pre-removal operation
  • Loosen the clutch cable (transmission side) adjusting nut as far as possible.
  • Instrument Panel Cover Lower Removal (Refer to GROUP 52A - Instrument Lower Panel ).

 Post-installation operation
  • Instrument Panel Cover Lower Installation (Refer to GROUP 52A - Instrument Lower Panel ).
  • Clutch Pedal Adjustment (Refer to .)





Clutch pedal removal steps


1.
 Clutch cable connection (clutch pedal side)


2.
 Snap pin <LHD>


3.
 Clevis pin <LHD>


4.
 Brake and clutch pedal assembly <LHD> or Clutch pedal assembly <RHD>


5.
 Pedal pad


6.
 Pedal stopper


7.
 Pedal stopper
<<A>>
8.
 Clutch interlock switch (for starter relay)


9.
 Clutch interlock switch (for cruise control system and OSS)


10.
 Clutch pedal



Clutch cable removal steps


1.
 Clutch cable connection (clutch pedal side)


·
 Air cleaner assembly <RHD> (Refer to GROUP 15 - Air Cleaner ).


·
 Battery and battery tray (Refer to GROUP 54A - Battery ).


11.
 Split pin


12.
 Clutch cable connection (transmission side)

>>A<<
 13.
 Clutch cable


14.
 Clutch cable bracket



Clutch interlock switch removal steps
<<A>>
8.
 Clutch interlock switch (for starter relay)


9.
 Clutch interlock switch (for cruise control system and OSS)

REMOVAL SERVICE POINT

<<A>> CLUTCH INTERLOCK SWITCH REMOVAL

caution
  • Use long-nose pliers to hold the clutch interlock switch bracket to avoid damage to the clutch interlock switch. Then remove the clutch interlock switch.

INSTALLATION SERVICE POINT

>>A<< CLUTCH CABLE INSTALLATION <RHD>

caution
  • When installing the clutch cable to the clutch pedal, make sure that there are no bends in the inner cable. In addition, when installing the clutch cable in clutch pedal and release lever, be careful of an inner cable not to bend by force.
  • Install the grommet securely to the dash panel.