![](../../../img/22/AKB00842AB00ENG.png)
|
1.Check the splines for
damage and wear. 2.Check that the helical gear
teeth surfaces are not damaged or worn.
|
|
1.Combine the needle roller
bearing with the bearing sleeve and gear, and check that
it rotates smoothly without noise or play.
|
|
2.Check the needle roller
bearing cage for deformation.
|
![](../../../img/22/AK204298AB00ENG.png)
|
1.Check if the clutch gear
teeth are damaged or broken. 2.Check internal
surface for damage, wear and broken threads.
|
![](../../../img/22/AK204217AB00ENG.png)
|
1.Combine the synchronizer
sleeve and hub, and check that they slide
smoothly. 2.Check that the sleeve is free from
damage at its inside splines ends.
|
|
Check that the spring is not
sagging, deformed or broken.
|
![](../../../img/22/AK204299AB00ENG.png)
|
1.Check that the helical and
clutch gear tooth surfaces are not damaged or
worn. 2.Check that the synchronizer cone surfaces
are not roughened, damaged or worn. 3.Check that
the gear inside diameter and front and rear surfaces are not
damaged and
worn.
|