Code No. P0842:
Malfunction of the Secondary Pressure Sensor (low voltage)
DIAGNOSTIC FUNCTION
The CVT-ECU determines that the system is defective when the secondary pressure sensor output
voltage is lower than a predetermined value.
JUDGEMENT CRITERIA
- The secondary pressure sensor detects a voltage of 0.09 V or less for 5 seconds
with the CVT oil temperature more than -20°C.
PROBABLE CAUSES
- Malfunction of the CVT assembly (Faulty secondary pressure sensor or valve
body assembly)
- Damaged wiring harness and connectors
- Malfunction of CVT-ECU
|
STEP 1. Check the following connector
|
|
- CVT assembly connector
- CVT-ECU connector
|
|
Check the terminals for a contact status problem and internal short circuit.
|
|
Q.
Is the check result normal?
|
|
Go to Step 2.
|
|
|
|
Repair the defective connector.
|
|
|
|
STEP 2. Check for open circuit or short to earth in SSPW, LPRS line
between the CVT assembly connector and the CVT-ECU connector
|
|
Q.
Is the check result normal?
|
|
Go to Step 3.
|
|
|
|
Repair the wiring harness.
|
|
|
|
STEP 3. Voltage measurement at CVT-ECU connector (LPRS terminal)
|
|
(1)Connect the CVT assembly connector and CVT-ECU connector.
|
|
(2)Drive the vehicle until the engine is warmed up.
|
|
(3)Measure the CVT-ECU connector side by backprobing.
|
|
(4)Selector lever position: P range.
|
|
(6)Measure the voltage between the CVT-ECU connector (LPRS terminal) and (SGND terminal). OK: approx. 0.84 V
|
|
Q.
Is the check result normal?
|
|
Go to Step 4.
|
|
|
|
Replace the CVT assembly.
|
|
|
|
STEP 4. Symptom recheck after erasing diagnosis code
|
|
Q.
Is the diagnosis code stored?
|
|
Replace the CVT-ECU.
|
|
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent
Malfunctions .).
|
|
|